Noise Test Chamber

Product Details:

We manufacture best quality Steel Acoustic Test Chamber for all kind of electric motors in Noida.

Product Details:

Sound Testing Chamber the primary function of Sound Test Chamber or say Noise Test Booth is to control the ambient noise and increase the accuracy of intensity measurement by reducing sound reflections. These are widely used in automotive sector, air-conditioner, Horn Manufacturing, Engine Rooms, Picture Tube manufacturing units, refrigeration units, fan, motors & compressors manufacturing units, speaker testing etc. Noise Testing Booth is designed to fulfill Client''s requirement & to control noise as per products specification.

 

Features:

• Sturdy design
• Noise resistance
• Durability

Additional Information:

• Item Code: HSE-926
• Port of Dispatch: Noida
• Production Capacity: 1000
• Delivery Time: 2week

Product Details:

Acoustic Insulated Noise Proof Chambers for machine noise & Loudspeaker measurements, Audiometry. HS Engineers offers customized solutions for Sound Proof/Sound Testing/ Anechoic chambers. Sound Proof/Sound Testing chambers create acoustically quiet, non reflecting space, insulated from outside noise. Such a quiet space is used for accurate measurement of noise generated by machines, HVACs, motors, refrigerators. These are also used in Audiometry. Smaller sound proof chambers are built of MS walls lined with glass/rock wool and acoustic tiles. A Sound Proof Chamber made with MS walls lined internally with glass/rock wool. Anechoic chambers provide low noise environment, very high internal sound absorption and very low reverberation time for a range of audio frequencies. Anechoic chambers are used for measurements on loudspeakers and microphones. Anechoic chambers are generally built of brick walls. These walls are lined with wedges (shown below) of high density glass wool. These wedges ''absorb'' incident sound, thus creating a reflection free space.

 

Features:

• Soundproof
• Require less maintenance
• Sturdy construction

 

Additional Information:

• Item Code: HSE-1001
• Port of Dispatch: Noida
• Production Capacity: 1000
• Delivery Time: 1 week
• Packaging Details: Standard

Product Details:

HS Engineer Noise Testing Room. Designed specifically for use with either above ground or pit mounted automotive dynamometers capable of testing up to 1800 HP vehicles, we offer customized room sizes according to client requirements to provide the best match and use of space for a wide variety of dynamometer set-ups. Rooms are sized to accommodate front, rear and all-wheel drive vehicles. Due to the nature and size of a typical automotive dynamometer installation it is not uncommon for us to design and provide a custom sized room to meet your specific requirements.

 

Specifications:

• 4” thick Acoustic Panel construction style STC-52
• Interior ceiling height of 12’-0” for above ground dyno
• One STC-47 vehicle entry door 8’ wide x 8’ high double leaf
• One STC-47 personnel entry door 3’ wide x 7’ high single leaf
• One viewing window 60” wide x 42” high(Customizable)

Accessories:

• Powerful Silent ventilation system with single interior exhaust stack
• Larger double leaf entry door 6’ wide
• Additional viewing windows available up to 96” wide
• Pre-wired modular lighting and electric package
• Factory prime and finish painting
• Interlocking full rubber floor system
• Operator control room add-on (6’ deep with additional personnel door)
• Explosion vent relief panels
• Auxiliary Fans for Transmission and Tire Cooling
• Hardware/Fans/Hinges/Widnow/additional accessories cost will be extra

Additional Information:

• Item Code: HSE-ATC-002
• Production Capacity: 1000
• Delivery Time: 3-4 weeks
• Packaging Details: Standard

Product Details:

Automotive Parts manufacturers from around the country have selected HS Engineers to provide them with product test chambers, hemi-anechoic rooms and full anechoic chambers. Specifications range from simple buzz, squeak and rattle quiet rooms to large sophisticated anechoic rooms.HS Engineers is a vendor that can provide engineering assistance and turn-key supply and installation of your noise control chamber.

Acoustic Test Enclosures:

We provide free field test environments for measurement of noise emissions from products and equipment, frequency response and directivity of sources, and general acoustic research activities.

 

Our acoustic chambers can meet most any product test specifications and test standards such as: ISO 3744, ISO 3445, ISO 7779, ANSI S12.54, ANSI S12.55 and ANSI S12.10.

 

Applications include:

• Various Automotive Parts: Windshields, Doors,
• Seats, Windows, Sunroofs, etc.
• Speakers
• Clutch Noise Test
• Brake Noise Test
• Gear Noise Test
• Actuator Noise Test
• Window Motor Noise Test
• Pumps
• Motors
• Fans and Blowers
• Lights
• Automobiles, Tractors, ATVs, Lawn Mowers, etc.
• Hardware/Fans/Hinges/Widnow/additional accessories cost will be extra

Additional Information:

• Item Code: HSE-ATC001
• Production Capacity: 100
• Delivery Time: 3-4 weeks
• Packaging Details: Standard

Product Details:

We are a leading firm offering Sound Testing Room to our clients.

Our Noise Test Chambers are widely used in Auto Manufacturing Industries to test Sound of their manufactured parts.

We manufactured below chambers:

• Exhaust muffler Noise test chamber
• clutch noise test chamber
• Steering Noise Test Chamber
• Power Steering Noise Test Chamber
• Power seat Noise Test Chamber
• Motor Noise Test Chamber
• Engine Noise Test Chamber
• actuater Noise Test Chamber

Product Details:

We are a one of the top most industries offering Acoustic Test Camber to our clients for Sound Testing of their movable, Electrical or Automotive Parts

Product Details:

The HS Engineers includes a precision-grade, double-walled Acoustic Test Chamber product noise emission testing and other acoustic research/testing requiring an acoustic free-field over a reflecting plane isolated from background noise. Equipment available for use in chamber includes a multiple-channel simultaneous data acquisition system, automated microphone and specimen positioning systems, signal generators, and sound sources. The chamber is qualified for testing as meeting or exceeding requirements of accredited test standards. Types of testing commonly performed in the Acoustic Test Chamber include: product noise emission testing (including sound power determinations, operator/bystander sound pressure level measurements, prominent tone evaluation, loudness calculations, and advanced sound quality analysis), waveform recording from microphones, or binaural recording/analysis. The extremely low-noise and free-field environment also allows for testing audio component frequency response, directionality response, and signal fidelity. Aural non-detectability of military devices (per MIL-STD-1474D) is also available. The hemi-anechoic chamber is easily configured for client testing requirements, including data lines, electric power, air supply/exhaust, etc. A large acoustically-isolated control area adjacent to the chamber allows incorporation of any client-supplied equipment into the test program if needed.

Features:

• Isolated floors
• Light & power connections
• Ventilation
• Temperature & humidity control
• Instrumentation sleeves
• Control supports, working floors & single & double sound doors

Additional Information:

• Item Code: HSE-981
• Port of Dispatch: Noida
• Delivery Time: 2week

Product Details:

Car Seat Noise Test Chamber, These Acoustic Test Chamber are used to test adjustable height seat noise during up and down Operation.

These Acoustic Test chamber consists of Pneumatic Operated Acoustic Doors and Acoustic Foam to provide accurate Product Sound.

Our Noise Test Chamber fabricated out of 14/16 SWG thick TATA CRCA Sheet Insulated woth high density 100 Kg/m3 Stone wool acoustic insulation with 3 mm thick MTS high density Acoustic Butyl Sheet for effective sound Insulation.

Additional Information:

• Production Capacity: 100
• Delivery Time: 3 weeks
• Packaging Details: Standard

Product Details:

Noise Test Booth-NVH Test Booths are mostly customized products designed and manufactured according to the client’s specific requirement which is different in every case. The primary function of this booth is to control the shop floor noise and increase the accuracy of intensity measurement by reducing sound reflections. These booths are also used to find out defect in the product by using noise analysis method. Both sliding doors (material inlet & outlet) are automatic & synchronize with test panel, (no need to pull / push material manually). These are widely used in automotive sector, air-conditioner manufacturing units, refrigeration units, fan, motors & compressors manufacturing units, speaker testing etc. With excellent isolation from external Noise and optimum reduction of reverberation times inside the Noise control Booths produced by HS Engineers the noise testing problems of our clients are happily put to rest. Automotive NVH (noise, vibration, and harshness) Noise Mapping Structural Dynamics & Monitoring.

Features:

• Easy to relocate
• Maximum Isolation
• Optimum strength
• Hardware/Accessories cost will be extra

Additional Information:

• Item Code: HSE-901
• Port of Dispatch: Noida
• Production Capacity: 100
• Delivery Time: 1 week

Product Details:

Noise Test Booth can be used as quiet rooms, medical testing facilities, equipment testing booths, portable laboratories and other commercial sound isolation applications. Noise Testing Booth/ Acoustic Booths are used for a host of Noise testing applications. In fact, there are many manufacturers utilizing Noise Control Booths as research and development labs for product testing. Manufacturers of stereo components, phones, blenders, fishing line, speakers, amplifiers, automotive airbags, Automotive Horns, Air Conditioning Noise, TV Noise, Engine Noise, Auto Parts Noise and a host of other product tests are regularly performed using a HSE Noise isolation sound booth in order to ensure the accurate recording of test or sample data in a quiet environment. HSE Noise control Booths are also used in various medical application testing such as psychological tests, MRI, and cognitive speech testing and therapy.

Features:

• Engine Noise Testing Room
• HVAC Equipment Testing Room
• Noise Testing Room
• Machine Sound Testing Rooms
• Hardware/Fans/Hinges/Widnow/additional accessories cost will be extra

Additional Information:

• Item Code: HSE-927
• Port of Dispatch: Noida
• Production Capacity: 1000
• Delivery Time: 2week

Product Details:

NVH Testing Booths-NVH (Noise Vibration Harshness) Test Booths are mostly customized products designed and manufactured according to the client specific requirement which is different in every case.The primary function of this booth is to control the shop floor noise and increase the accuracy of intensity measurement by reducing sound reflections. These booths are also used to find out defect in the product by using noise analysis method. Both sliding doors (material inlet outlet) are automatic synchronize with test panel, (no need to pull / push material manually.) These are widely used in automotive sector, air-conditioner manufacturing units, refrigeration units, fan, motors & compressors manufacturing units, speaker testing etc.With excellent isolation from external Noise and optimum reduction of reverberation times inside the Noise control Booths produced by HS Engineers the noise testing problems of our clients are happily put to rest. Automotive NVH (noise, vibration, and harshness). Noise Mapping Structural Dynamics Monitoring.

Features:

• Excellent design- Easy to install- Specious - Hardware/Fans/Hinges/Widnow/additional accessories cost will be extra

Additional Information:

• Production Capacity: 1000
• Delivery Time: 4 weeks
• Packaging Details: Standard

Product Details:

HS Engineers is one of the largest manufacturers of Noise Test Chambers for Auto Parts Testing like Brake Test, Gear Knob Test, Seat Noise Test, Steering test, Actuator Motor test, Engine test, Wheel Noise Test etc.